Unleash your bikes wild side, with the Savage Dual exhaust by SLK-Customs
These pipes will definitely draw some attention to your ride.
The sound is not obnoxious, but is a deep, strong rumble that you have been looking for.
At SLK-Customs we mandrel bend our pipe, not crush them
Each set of pipes, come ceramic coated
One coat inside and double on the outside for extra protection.
Ceramic coating not only helps the heat flow through the pipes, It helps with performance.
When you combined those two elements you get a high performance, free flowing exhaust
Our coatings will not fade or change colors & will last years.
Designed for use with the stock air cleaner;
If using an aftermarket air cleaner a fuel management module is highly recommended
Baffles Included: No (Are available)
O2 port: None
Header Pipe: Complete System
Material: 16-gauge Steel
Diameter: 1 3/4″
Exhaust System: Dual 2-2
Finish: Flat Black Ceramic Coated
Heat Shields: None
Upon recieving your pipes. Product must be kept clean & free of any grease. Start bike and allow to run for 15 minuts to complete the ceramic coatings curing process. Allow pipes for completely cool before use. Thats it, enjoy your pipes & ride safe.
Jetting/ Fuel Controller
Most pipe swaps require some rejetting or remapping of the fuel system. EPA regulations have forced the manufactures to run bikes on the side of lean, so in many instances, additional airflow created by installing a less restrictive exhaust system pushes them over the edge. The rule of thumb is; the less restrictive the new exhaust, the more likely it is to require rejetting. This is particularly true if you're making a radical change in the exhaust system design. Not having the correct tune will cause the coating to crack & rust. Make sure your bike is tuned properly.
*Not following these steps will damage the coating, voiding any & all warranty.